How to Map a Shared Network Folder as a Network Drive

Mapping a shared network folder as a network drive is done using the “Map Network Drive” wizard. This wizard works the same in Windows 7 and Windows 8.x but it is started slightly differently in each operating system.

For example, in Windows 8.x you need to start File Explorer and go to This PC, then expand the Computer tab on the ribbon and click or tap “Map network drive”.

clip_image002

In Windows 7, start Windows Explorer and go to Computer. On the top toolbar you will see several buttons including one that says “Map network drive”. If you don’t see it, it means that there is insufficient space for displaying it and you need to maximize the Windows Explorer window.

clip_image004

The “Map Network Drive” wizard is now displayed. First, select the letter you want to assign to the drive you are about to map. Then, you need to select the shared network folder you want it to point to. You can directly type the path to it, if you know it. When typing the network path, you must start with “\\” followed by the name of the computer that is sharing the folder you want to map, followed by “\” and the name of the shared network folder. If you don’t really know these details, you can always click or tap “Browse”.

clip_image005

In the “Browse For Folder” window, browse through your network computers and expand the computer and select the folder you want to map and press “OK”.

Note, do not double-click on it as this may return an error saying that you don’t have access to it because you have not yet entered the credentials required to access it.

clip_image006

The network path to the selected folder is now displayed in the “Folder” entry. By default, Windows checks the box that says “Reconnect at sign-in”. This is to make sure that the drive you are about to map is used for all subsequent sign-ins. If you clear this box, the mapped resource will be used by Windows until you sign out from your user account and you will have to recreate it when you sign in again.

The next important setting says “Connect using different credentials”. This setting is disabled by default and it means that Windows will try to connect to the mapped drive using the user account and password from your computer. If this user account doesn’t exist on the computer sharing the selected folder, then you will have issues connecting to it. That is unless that folder is shared with the Homegroup or with the Everyone user group. In these scenarios you will be able to access the shared network folder.

If you need a refresher about the Homegroup and how it works, please read lesson 5.

If you want to use a specific user account and password to connect to the shared network folder and that user has permissions to access it, then check the “Connect using different credentials” setting.

clip_image007

When you are done configuring how you want to connect to the network drive, press “Finish”. If you enabled “Connect using different credentials”, the “Windows Security” window is shown, asking you to enter the user account and password it should use to connect to the network drive. If you did not enable this setting, Windows will try to connect to the network drive using the user account details from your computer.

clip_image008

In the Windows Security window it is very important that you pay attention to how you enter the credentials of the user account you are about to use.

In the “Username” field it is mandatory that you start by typing the name of the computer you will connect to. The name of this computer is mentioned in the line that says “Enter your credentials to connect to: Computer Name”. Simply type what you see there, followed by a “\” and then the user name you want to use.

If you are connecting to a Windows 8.x computer with a Microsoft account, type the e-mail address used by that account (for example: howtogeek@outlook.com or howtogeek@live.com). Then, in the “Password” field, type the password for that user account. If you want your credentials to be remembered, check the box that says “Remember my credentials”.

Note, we advise against doing that at first because you might make a mistake in typing the credentials, at least the first time you try things. If you are successful during the first connection, then, when you connect again to this drive mapping, Windows will display the Windows Security window again, asking for the same log in details. Then you can enter them and check this box so that you don’t have to enter the user credentials each time you use this drive mapping.

When done, press “OK”.

clip_image009

The drive mapping is now complete and an Explorer window is shown, displaying the contents of the shared network folder you just mapped.

clip_image011

The drive mapping is displayed in the “This PC” section of File Explorer (in Windows 8.x) or the Computer section of Windows Explorer (in Windows 7). All the mapped drives are shown under “Network Locations”.

clip_image013

  • windows, samba
  • 1 Users Found This Useful
Was this answer helpful?

Related Articles

How to connect WebDAV on Windows 10

How to access MyFiles off-campus using WebDAV on a Windows 10 PC   From the Start Menu...

How to Connect to FTP Servers in Windows (Without Extra Software)

If you need to access an FTP server, you can install dedicated FTP clients with lots of...